Filter
Top Products
User Manual Page 24
o Set volume Choose destination (usually Volume control or Recording), device and
value of volume for audio card source or mute/checked state.
o Record Name automatically determines if the current naming convention
specified in naming convention area of the Recording settings tab is to be used, or you can
overwrite it. Preview, how the naming will look, is shown after clicking the eye icon.
Length is the length of the recording; quality sets the combination of channels, bits per
sample and a sample rate.
o Record using codecs Codec defined in Recording settings tab is used for recording
(even when codec recording is not active in Recording settings tab).
Name automatically determines if the current naming convention specified in naming
convention area of the Recording settings tab is to be used, or you can overwrite it.
Preview, how the naming will look, is shown after clicking the eye icon.
Length is the length of the recording.
o Wait Set here the time to wait.
o Beep Choose what beep you want to use.
o Run external program Browse for executable program and choose a way how it
should run (minimized, maximized).
o Shutdown Windows You can select/deselect here the sound warning (it overwrites the
setting in the Options tab).
4.2.9 LCD Editor
Here you can define properties of ‘LCD’ displays used in RX Radiator. Changes are reflected immediately
after pressing [Save changes and return] button. Changes are lost and LCD editor is closed after pressing
[Cancel].