Filter
Top Products
Recording a single track
These recording modes are ideal for recording tracks from
several CD’s. If you are making a compilation CD you can
do it either at high speed (RECORD FAST) or while
listening to the tracks (RECORD LISTEN). Finalization is
not executed automatically.
Preparing
1 Place an unfinalized CDR(W), absolutely free of scratches
and dust particles in the left CDR tray.
Place the disc from which you want to record in the right
CD tray.
2 With the CD recorder stopped, press REC TYPE one time
to select RECORD FAST or two times to select RECORD
LISTEN.
➜ The display first shows RECORD FAST or RECORD
LISTEN.
The fRECORDg label starts blinking.After 3 seconds
the display shows the remaining CDR(W) recording
time on the left and total time of source on the right.
(every 2 seconds PRESS RECORD is displayed.)
3 Program the track(s) for recording.
Press PROG to select one or more tracks for recording
(see programming):
- rotate the EASY JOG/ENTER key to the required track
number, then press the key (or ENTER on the remote
control)
or
- directly select the track number via the 10-keypad on the
remote control, then press the ENTER key to confirm your
selection and go to the next step.
4 Press STOP 9 or PROG to end programming.
➜ PROG lights continuously.
Recording
5 Press RECORD to start recording the program.
➜ WAIT lights up.The display shows the total remaining
time for the selected recording. High speed recording
starts. fRECORDg lights continuously.
0 For recording from the internal deck (RECORD FAST, REC
LISTEN or MAKE CD) we advise you to leave the
recording level at its factory setting (0 dB).
Note: It is possible to equalise the recording level of tracks
recorded from different CD’s. See the next paragraph.
0 To check the track number and track time, press Display.
This can be done during recording.
0 Recording will stop automatically.
Note: Copy prohibited tracks will be copied analog. ANALOG
REC is displayed.
6 To stop recording manually, press STOP 9.
➜ UPDATE lights up, fRECORDg goes out and recording
stops. (Minimal track length must be
4 seconds otherwise silence will be added to the track.)
7 Press STOP 9 one more time to remove the program of
tracks, if any.
8 Insert a new disc from which you want to record and
resume at step 1.
0 If STOP 9 was pressed within 3 seconds after RECORD,
no recording will take place.
0 After recording, the display shows UPDATE for several
seconds.The Total time indications can differ slightly.
However, no music information is lost.
Note: In this Recording mode, the Pause function is not
operative.
Finalizing
If you want to play the recorded CD(RW) on a normal
CD player, you must first finalize the disc. Please note that
you cannot add anymore tracks on a finalized CDR.
See Finalizing CDR and CDRW discs.When all tracks are
recorded you can finalize the CDR(W) disc:
9 With the recorder stopped press FINALIZE.
➜ The display shows FINALIZE CD and PRESS
RECORD.
10 Press RECORD.
➜ XX XX FINAL and the approximate finalization time
appear on the display.
0 The display counts down through the finalization. On
completion, the total number of tracks and the total time
recorded appears on the display.
0 For CDR(W),
r
changes to
d
on display.
Notes:
Finalizing will take at least 2 - 4 minutes.
During finalization, the CD recorder accepts no operating
commands.
When a CDR is finalized no more recordings can be added.
OPEN / CLOSE
P
LA
Y
/ P
A
US
E
S
T
O
P
REC
TYPE
OPEN / CLOSE
P
LA
Y
/ PA
U
SE
STO
P
EXT
SOURCE
E
RA
S
EFIN
A
L
IZ
E
CD
R
RECORD
AUDIO CD PLAYBACK
EA
S
Y JO
G
S
TO
RE
/
M
EN
U
C
A
N
C
E
L
/
D
E
L
E
T
E
C
D
AUDIO CD PLAYBACK
ENTER
PHONES
AUDIO CD PLAYBACK
DISPLAY
SCROLL
DJ MODE
REPEAT
SHUFFLE
PROG
C
D
R
7
7
X
A
U
D
IO
C
D
R
E
C
O
R
D
E
R
ANALOG
R
W
How to record from the internal deck
18
English
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 18