Pelco FR85081 Satellite Radio User Manual


 
C1648M (4/05) 11
REAR PANEL
Connections to the FT85081 transmitter and the FR85081 receiver are made to the rear panel
of the module. The following sections provide a view of the rear panel of the FT85081
transmitter and the FR85081 receiver.
REAR PANEL - FT85081 TRANSMITTER
Figure 4 illustrates the rear panel of the FT85081 transmitter.
Figure 4.
Rear Panel of FT85081 Transmitter
RACK POWER/ALARM CONNECTOR, 4-pin connector for power/alarm connection of
rack-mounted module
STANDALONE POWER CONNECTOR, 2-pin connector for power connection of standalone
module; removable mating connector with screw terminals (not shown)
VIDEO IN CONNECTORS (1-8), 75-ohm BNC analog video input
FIBER OPTIC CONNECTOR, ST or FC (dependent on FT85081 model)
DATA CONNECTOR, 9-pin connector; removable mating connector with screw terminals
(not shown)
DATA SELECTION SWITCH, 10-position rotary switch (positions 0-9)
For additional information about rear-panel connections and about the Data Selection switch,
refer to the
Installation
section.
5
6
7
8
1
2
3
4
5
6
7
8
GND
0
1
2
3
4
5
6
7
8
9