Filter
Top Products
18 C2649M (9/07)
CONNECTING THE TRANSMITTER/RECEIVER
Connections to the FT106011 transmitter and the FR106011 receiver are made on the rear panel of the
modules (refer to Figure 7) and consist of the following:
• Power connection
NOTES:
– A 12 VDC or 24 VAC power supply can be used to power the transmitter/receiver when
used as a stand-alone module. A 12 VDC power supply is provided. If a 24 VAC power
supply is used, the power supply must be a Listed Direct Plug-In Power Unit marked as
Class 2 and rated as 24 VAC, 200 mA (minimum output).
– In extreme temperature conditions, it is recommended that an industrial-rated outdoor
power supply be used.
• Fiber connection
• Contact closure connection
• Data connection
• Audio connection
• Video input connection (transmitter only)
• Video output connection (receiver only)