Filter
Top Products
1. Have “T0E** ” indicated on display, and move the optical pickup
to the most inside (only when a MD cartridge type laser power
meter is used).
2. Set the laser power meter.
[For use of stick type laser power meter.]
2-1 Uncover the laser power meter. (as shown in Fig. 6 )
2-2 Locate the sensor of the laser power meter right over above
the optical pickup (horizontally at a level of the disc position). (as
shown in Fig. 7 )
[For use of MD cartridge type laser power meter.]
2-1 Set the laser power meter and close the disc cover, fix it with
tape as not to open. (as shown in Fig. 8 )
Fig. 6
Fig. 7
Fig. 8
3. Press the PLAY key of the remote controller (“T0E** ” changes to
“LD ” of the LCD).
4. Press the key of the remote controller (“LD ” changes to “LP ”
of the LCD).