Filter
Top Products
35
RQT8043
RQTX0029
REFERENCE
ENGLISH
7 Menus Page
The Setup menu cannot be
accessed.
• Select “DVD/CD” as the source.
• Cancel program and random play.
• Cancel JPEG’s playback.
—
18
—
7 Sound abnormal or improper
Sound is distorted.
• Noise may occur when playing WMA. —
Effects do not work.
•
Some audio effects do not work or have less effect with some discs.
•
Dolby Pro Logic II does not work if you have changed the play speed.
—
—
Humming is heard during
play.
• An AC mains lead or fl uorescent light is near the main unit. Keep
other appliances and cables away from the main unit.
—
No sound.
• There may be a slight pause in sound when you change the play
speed.
—
7 Picture abnormal or unviewable
The picture on the television
is not displayed correctly or
disappears.
• The unit and television are using different video systems.
Use a multi-system or PAL television.
• The system used on the disc does not match your television.
– PAL discs cannot be correctly viewed on an NTSC television.
– This unit can convert NTSC signals to PAL 60 for viewing on a
PAL television (“NTSC DISC OUT” in “VIDEO” tab).
• Ensure that the unit is connected directly to the television, and is
not connected through a video cassette recorder.
• Mobile telephone chargers can cause some disturbance.
• If you are using an indoor television antenna, change to an
outdoor antenna.
• The television antenna wire is too close to the unit. Move it away
from the unit.
—
—
25
31
—
—
—
Picture size does not fi t the
screen.
• Change “TV ASPECT” in the “VIDEO” tab.
• Use the television to change the aspect.
• Change the zoom setting. (“ZOOM” in Functions menu.)
24
—
22
Menu is not displayed
correctly.
• Restore the zoom ratio to “NORMAL”. (“ZOOM” in Functions
menu.)
22
Auto zoom function does not
work well.
• Turn off television zoom function.
• Zoom function may not work well, especially in dark scenes and
may not work depending on the type of disc.
—
—
7 Unit displays
The display is dark.
• Select “BRIGHT” in “FL DIMMER” in the “OTHERS” tab. 25
“NO PLAY”
• You inserted a disc the unit cannot play; insert one it can.
• You inserted a blank disc.
• You inserted a disc that has not been fi nalized.
12
—
—
“NO DISC”
• You have not inserted a disc; insert one.
• You have not inserted the disc correctly; insert it correctly.
—
16
“OVER CURRENT ERROR”
• The USB device is drawing too much power. Switch to DVD/CD
mode, remove the USB and turn the unit off.
—
“F61”
• Check and correct the speaker cable connections.
If this does not fi x the problem, consult the dealer.
8
“F76”
• There is a power supply problem. Consult the dealer. —
“DVD U11”
• Disc may be dirty. Wipe it clean. 27
“ERROR”
• Incorrect operation performed. Read the instructions and try
again.
—
“DVD H & &”
“DVD F & & &”
& stands for a number.
• Trouble may have occurred. The numbers following “H” and “F”
depend on the status of the unit. Turn the unit off and then back
on. Alternatively, turn the unit off, disconnect the AC mains lead,
and then reconnect it.
• If the service numbers fail to clear, note the service number and
contact a qualifi ed service person.
—
—
RQTX0029-B10.indd 35RQTX0029-B10.indd 35 1/21/07 4:45:57 PM1/21/07 4:45:57 PM