Filter
Top Products
OTHER OPERATIONS
ENGLISH
28
RQT8043
RQTX0029
Using the radio
Automatic presetting
1 To select “FM”.
OR
(main unit) (remote control)
2 Press and hold.
OR
(main unit)
(remote
control)
Release the
button when
“FM AUTO” is
displayed.
The tuner tunes to the lowest frequency and
starts to preset all the stations it can receive into
the channels in ascending order.
• “SET OK” is displayed when the stations are
set, and the radio tunes to the last preset
station.
• “ERROR” is displayed when automatic
presetting is unsuccessful. Preset the
channels manually (\ see left).
Manual tuning
1 To select “FM”.
OR
(main unit) (remote control)
2 To select “MANUAL”.
(main unit)
3 To select the frequency.
OR
(main unit) (remote control)
Press and hold [4 TUNING 3] until the
frequency starts scrolling to start automatic
tuning. Tuning stops when a station is found.
Presetting the channel
Remote control only
Up to 30 stations can be set for FM.
1.
While listening to the radio broadcast
Press [ENTER].
2.
While the frequency and “PGM” are fl ashing on the
display
Press the numeric buttons to select a
channel.
•
To select a 2-digit number
Example: To select 12,
• Alternatively, press [4, 3], then press
[ENTER].
The station occupying a channel is erased if
another station is preset to that channel.
Selecting the preset channels
1 To select “FM”.
2 To select the channel.
TO
• Alternatively, press [4, 3].
When a stereo FM broadcast is being
received, “ST” lights in the display.
If noise is excessive in FM
Main unit only
Press and hold [–FM MODE] to display
“MONO”.
Press and hold [–FM MODE] again to cancel the
mode.
The mode is also cancelled when you change the
frequency.
RQTX0029-B10.indd 28RQTX0029-B10.indd 28 1/21/07 4:45:52 PM1/21/07 4:45:52 PM