Filter
Top Products
REFERENCE
34
RQT8043
RQTX0029
ENGLISH
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if
the solutions indicated in the chart do not solve the problem, consult your dealer for instructions.
7 Power Page
No power.
• Insert the AC mains lead securely. 8
The unit is automatically
switched to the standby
mode.
• The Sleep timer was working and had reached the set time limit. 15
7 Unresponsive or inoperable function
No response when any
buttons are pressed.
• This unit cannot play discs other than the ones listed in these
operating instructions.
• The unit may not be operating properly due to lightning, static
electricity or some other external factor. Turn the unit off and then
back to on. Alternatively, turn the unit off, disconnect the AC mains
lead, and then reconnect it.
• Condensation has formed: Wait 1 to 2 hours for it to evaporate.
12
—
—
No response when remote
control buttons are pressed.
• Check that the batteries are installed correctly.
• The batteries are depleted. Replace them with new ones.
• Aim the remote control at the display and operate.
6
6
14
No picture or sound.
• Check the video or speaker connection.
• Check the power or input setting of the connected equipment and
the main unit.
• Check that the disc has something recorded on it.
8, 9
—
—
You have forgotten your
ratings password.
Reset all the settings to Factory
Preset.
• While stopped and “DVD/CD” is the source, press and hold [7] on
the main unit and [
h
10] on the remote control until “INITIALIZED”
disappears from the television. Turn the unit off and on again.
All settings will return to the default values.
—
7 Specifi c operation undesirable or unexpected
It takes time before play
starts.
• Play may take time to begin when an MP3 track has still picture
data. Even after the track starts, the correct play time will not be
displayed. This is normal.
—
Folders on a data CD are not
displayed correctly.
• Folders deeper than the eighth layer are displayed as the eighth
layer.
—
A menu screen appears
during skip or search.
• This is normal for Video CDs. —
Playback control menu does
not appear.
with playback
control
• Press [7, STOP] twice and then press [3, PLAY]. —
The program and random
play functions do not work.
• These functions do not work with some DVD-Videos. —
Play does not start.
• This unit may not play WMA that contains still picture data.
• If a disc contains CD-DA and other formats, proper playback may
not be possible.
—
—
7 Subtitle
No subtitles.
• Display the subtitles. (“SUBTITLE” in Functions menu) 22
7 A-B repeat
Point B is automatically set.
• The end of an item becomes point B when it is reached. —
RQTX0029-B10.indd 34RQTX0029-B10.indd 34 1/21/07 4:45:56 PM1/21/07 4:45:56 PM