Filter
Top Products
RQT8606
34
Operating both the television and the home theater system:
Control with HDMI (HDAVI Control)
What is HDAVI Control?
HDAVI Control is a convenient function that offers linked operation of this
unit and Panasonic TV (VIERA) with HDAVI Control. You can use this
function by connecting the equipment with the HDMI cable. For
operational details, see the operating instructions of the connected
equipment.
Preparation
≥Confirm that the HDMI connection (➜ page 8) has been made.
≥Confirm that the scart cable is not connected.
≥Set “Control with HDMI” (HDAVI Control) to “On” (➜ page 26, “HDMI”
tab).
≥To complete and activate the connection correctly, turn on all HDAVI
Control compatible equipment and select the input channel
corresponding to the home theater on the television.
≥
Whenever the connection or settings are changed, reconfirm the points
above
.
≥When you turn off the main unit, TV selector changes to TV tuner.
You can turn on the main unit and television, and start playing the disc in
the play position with a single press of a button.
Press [ONE TOUCH PLAY].
[Note]
Playback may not be immediately displayed on the television. If you miss
the beginning portion of playback, press [:] or [6] to go back to
where playback started.
You can select whether audio is output from the home theater system or
the television by using the television settings. For details, refer to the
operating instructions of your television.
When audio is output from the home theater speakers
≥The television speakers are automatically muted.
≥You can control the volume setting using the volume or mute button on
the television remote control. (The volume level is displayed on the main
unit’s FL display.)
≥If you turn off the home theater system, speakers automatically switch
to the television.
When audio is output from the television speakers
≥The volume of the home theater system is set to “0”.
≥Audio output is 2-channel audio.
≥To cancel muting, you can also use the home theater remote control
(➜ page 32, Muting the sound).
≥When switching between the home theater system and television
speakers, the TV screen may be blank for several seconds.
≥You can set whether the main unit will automatically switch to
“TV” or “D-IN” by pressing and holding [RETURN] while the main unit is
in “TV” or “D-IN” mode respectively.
When the television is turned off, the home theater system goes into
standby mode automatically.
≥This function works only when “DVD/CD”, “TV”
§
or “D-IN”
§
is selected
as the source on the home theater system.
§
Depending on the function setting you made above, “TV” or “D-IN”,
Power off link works only when:
≥The function is set to “TV”, and “TV” is selected as the source.
≥The function is set to “D-IN”, and “D-IN” is selected as the source.
One Touch Play
ONE TOUCH PLAY
ONE TOUCH PLAY
Theater speaker
Power off link
Operating both the television and the home theater system: Control with HDMI (HDAVI Control)
HT855En.book Page 34 Tuesday, March 7, 2006 2:33 PM