Panasonic SC-HT855 Speaker System User Manual


 
RQT8606
33
Operating other equipment
Operating other equipment
You can use the remote control to operate a Panasonic television.
Connect your equipment referring to “Cable TV box or video cassette
recorder connection” (page 9).
[Note]
The remote control may not work properly with some models.
Aim the remote control at the television.
Turning the television on/off
Press [Í TV].
Switching the television’s video input mode
Press [TV/AV].
Adjusting the volume
Press [r, s TV VOLUME].
To play audio from your television through your home theater
system
Press [EXT-IN] to select “TV” or “AUX” as the source, reduce the volume
on the television to its minimum, and control the volume on the main unit.
Each time you press the button:
MUSIC P.----.TV----.AUX
^"""" D-IN(---_}
You can enjoy 5.1-channel surround sound when you turn on Sound
Field Control (MOVIE, SPORT
or
MUSIC) (page 30).
This unit can decode the surround signals received through cable TV box,
digital broadcasting or satellite broadcasts. Refer to your equipment’s
operating instructions for details. Only Dolby Digital and PCM can be
played with this connection.
Press [EXT-IN] several times to select “D-IN” (Digital In) as
the source.
Main unit: Press [SELECTOR] several times.
When you select “D-IN” as the source, you can select the following
sound effects. (These functions only work with Dolby Digital or PCM,
excluding Audio Mode, which only works with Dolby Digital Dual Mono.)
PCM FIX Mode
Press and hold [FUNCTIONS].
PFIX ON: Select when receiving only PCM signals.
PFIX OFF (factory preset): Select when receiving Dolby Digital and PCM
signals.
Dynamic Range Compression
Press and hold [SUBWOOFER LEVEL].
DRC ON: Adjusts for clarity even when the volume is low by compressing
the range of the lowest sound level and the highest sound level.
Convenient for late night viewing. (Only works with Dolby
Digital)
DRC OFF (factory preset)
Audio Mode
Press and hold [PLAY MODE].
AUDIO ST, AUDIO L, AUDIO R (“AUDIO L” and “AUDIO R” only appear
when the signal is Dolby Digital Dual Mono.)
Dolby Pro Logic
II (page 30)
Press [ÎPLII].
[Note]
Audio that is input through the OPTICAL IN terminal cannot be output
through the HDMI terminal.
Operating the television
FUNCTIONS
TV/AV
TV VOLUME
TV
,
ONE TOUCH PLAY
SUBWOOFER LEVEL
PL
PLAY MODE
EXT-IN
Operating the cable TV box, digital
broadcasting or satellite receiver
OPTICAL IN
To DIGITAL OUT
Back of the main unit
Optical digital audio cable (not included)
Do not bend sharply when connecting.
HT855En.book Page 33 Tuesday, March 7, 2006 2:33 PM