Filter
Top Products
37
RQT7708
∫ To check a program
Press [PROG].
The timer-programming screen appears.
∫ To correct a program
While the timer programming screen is on the television,
1 Press [PROG] to highlight the program you want to correct and
press [ENTER].
2 Select the item with [21] and correct it with [34].
∫ To cancel a program
While the timer programming screen is on the television,
1 Press [PROG] to highlight the program you want to cancel.
2 Press [CANCEL].
To clear the timer programming screen
Press [MENU].
The unit switches tape speed to EP if it determines there is not
enough tape to record the entire program in SP mode. The change
may start at the beginning of the recording or part way through,
depending on the remaining tape.
Before using this function, set the length of the tape you are using
(➜ page 42). It may not work correctly if you use tapes with irregular
lengths.
[Note]
This function does not guarantee recording of the entire program.
To check, correct, and cancel timer programs
Auto SP/EP change
DATE CH ON OFF 1/2
27WE 2 8:02
PM
9:30
PM
SP
SU-SA 125
10
:30
AM
11
:00
AM
A
SU 14 3:00
PM
4:00
PM
EP
19TU 5
10
:15
PM
11
:30
PM
VP
28TH AV 8:02
PM
9:30
PM
SP
30SA 4 7:10
PM
7:55
PM
VP
–––– –– –:–– –:––
–––– –– –:–– –:––
1
2
3
4
5
6
7
8
SELECT : s/r:
34
21
1st program
(30 min.)
2nd program (60 min.)
Example program combination
Example program combination
30 min. at SP
15 min.
at SP
45 min.
at EP
(when using a 60-min.
tape)
[Remember] Press [VHS] first.
7708en.book 37 ページ ２００４年２月１４日 土曜日 午後３時２４分