Filter
Top Products
24
RQT7708
Convenient functions
See below and the following page for details.
While stopped, press [PLAY MODE].
Each time you press the button:
[DVD-A] [DVD-V] [WMA] [MP3]
[JPEG]
All group ([DVD-A])>Program> Random>off (Normal play)
^------------------------------------------------------------------------}
[VCD]
[CD] (There is no on-screen display.)
(PGM)>1-DISC (RND)> A-DISC (ALL RND)
^------------ off (Normal play) (---------}
To exit
Press [PLAY MODE] several times while stopped.
≥Disable HighMAT disc play to use random and program play. Select
“Play as Data Disc” in Other Menu (➜ page 29).
[DVD-A]
Press [1] (play).
[VCD] [CD]
You can program all the items on
discs.
[DVD-A] [DVD-V]
[WMA] [MP3] [JPEG]
You can program all the items on a
disc in the play position.
1 [VCD] [CD]
Press
[SHIFT]i([DISC1]–[DISC5]).
2 Press the numbered buttons to select
the items ([WMA] [MP3] [JPEG] then press
[ENTER]).
≥To select a 2-digit number
e.g. 23: [S10] ➜ [2] ➜ [3]
[WMA] [MP3] [JPEG]
[2] ➜ [3] ➜ [ENTER]
≥Repeat this step to program other items.
≥[VCD] [CD]
Step 1 is unnecessary when programming tracks on the
same disc.
≥[DVD-A] [DVD-V] [WMA] [MP3] [JPEG]
To select an item using the cursor buttons
Press [ENTER] and [34] to select an item, then press
[ENTER] again to register.
All the items in the selected disc, title or group are selected
when you select “ALL”.
3 Press [1] (play).
To add or change the program
[VCD] [CD] (Add only)
Repeat steps 1 and 2.
[DVD-A] [DVD-V] [WMA] [MP3] [JPEG]
Press [34] to select an item, then repeat step 2.
To clear an item
[VCD] [CD]
Press [CANCEL].
[DVD-A] [DVD-V] [WMA] [MP3] [JPEG]
1Press [34] to select an item.
2 Press [CANCEL] (or press [3421] to select “Clear” and
press [ENTER]).
To clear the whole program
[VCD] [CD]
Press [∫] so “CLEAR” is displayed.
[DVD-A] [DVD-V] [WMA] [MP3] [JPEG]
Press [3421] to select “Clear all” and press [ENTER].
[Note]
≥[DVD-V] [WMA] [MP3] [JPEG]
Times are not displayed while programming.
≥[VCD] [CD]
Items the unit cannot find can be programmed but are canceled
during play. This is also the case if you program DVD-RAM, DVD-
Audio, DVD-Video, WMA, MP3 and JPEG.
≥The program is cleared when you switch the unit to standby, select
another source, exit the program mode by pressing [PLAY MODE]
or move the disc out of the play position.
[VCD] [CD] The program is retained in memory.
All group/Program/Random play