Filter
Top Products
35
RQT7708
You can watch and listen to other content when the unit is in timer
recording standby or during VHS recording.
∫ Television (➜ page 18)
1 During recording
Press [TV] to put the remote control in TV mode.
2 Press [TV/VIDEO] then select the channel with the numbered
buttons, [W CH] or [X CH].
∫ DVD (➜ page 20)
1 During recording
Press [DVD] to put the remote control in DVD mode.
2 Press [DVD/VHS] to select “DVD/CD”.
3 Insert a disc and start play.
∫ Radio (➜ page 44)
1 During recording
Press [TUNER] to put the remote control in TUNER mode.
2 Press [FM/AM] to select the radio band.
3 Select the radio channel with the numbered buttons, [W CH] or
[X CH].
[Note]
When you want to operate the VHS section again, be sure to press
[VHS] to put the remote control in VHS mode.
You can record from other video equipment (video cassette recorder,
camera, etc.)
Preparation
≥Connect the equipment to this unit’s input terminals.
–Turn the unit off before making connections.
–If audio output on the other equipment is monaural, use a stereo-
monaural conversion cable (not included).
≥Insert the tape, ensuring its tab is in place and find the place to
start recording.
1 Press [W CH] or [X CH] to select “AU”
channel.
2 Press [1] (play) to find the place to
start recording.
3 Press [;], then press
[SHIFT]i[¥ REC] to put the unit in
recording standby mode.
4 Press [SPEED] to select the tape
speed.
SP>EP>VP
^"""""""b
5 Start play on the other equipment.
6 Press [;] when you want to start
recording.
To stop
Press [∫].
∫ To make a timer program to record from other
equipment (➜ page 36)
Using another source while recording
Recording from other equipment
Y
P
B
/C
B
P
R
/C
R
COMPONENT
VIDEO OUT
S-VIDEO
OUT
LINE
OUT
LINE
IN
VIDEO
OUT
DVD/
VHS
VIDEO
IN
EXTDVD
L
R
RF IN
RF OUT
LOOP
EXT
75
AM
ANT
FM
ANT
LOOP
ANT
GND
A
Audio/video cable
(not included)
To video and audio
out terminals
Other equipment (play)
[Remember] Press [VHS] first.
7708en.book 35 ページ ２００４年２月１４日 土曜日 午後３時２４分