Filter
Top Products
e.g., I'_'_[]
I 3
Pull open.
1 Standby/on switch (POWER (b/I) (_ 19)
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
2 Power indicator
The indicator lights when this unit is turned on.
3 Connect iPod/iPhone (=> 32)
4 Adjust the volume of the main unit
5 Open or close the disc tray (_ 22)
6 Disc tray
7 SD card slot(_, 22)
8 IrCi'_m,II'¢i"i_,l Connect Auto speaker setup microphone
9 10 11 12 13
9 Display (FL display)
• "SRD" (SURROUND) lights when sound is output to the
surround speakers.
• The display is turned off when the volume is adjusted to
"0". (=> 37)
10 Remote control signal sensor
Distance: Within approx. 7 m (23 ft.)
Angle: Approx. 20° up and down, 30 ° left and right
11 Select the source (_ 23)
12 Stop (_ 25)
13 Start play (_ 25)
If the front cover comes off
(_ Hold rear side of main unit by one hand and match up left
or right side protruding hook on the cover first with the
corresponding slot on the unit.
@ Push the hook firmly towards the unit until it clicks into
place. Then push the succeeding hooks one by one until
all have clicked into place.
_) Check that the cover now moves correctly.
• If it does not, remove it and repeat the above procedure.
e.g., I'_"_ _1
9 10 11
1 AC IN terminal(_ 18)
2 Speaker terminals (_ 13)
3 Cooling fan
4 USB port for optional wireless adaptor (_ 17)
5 HDMI AV OUT terminal(_ 15)
6 FM radio antenna terminal (_ 16)
7 DIGITAL AUDIO IN terminals (_ 14, 15)
Terminal 1 is designated for connection with the TV.
Terminal 2 can be used with equipment other than the
STB.
8 Digital transmitter dock (_ 16)
9 LAN port (_ 17)
10 VIDEO OUT terminal (_ 14)
11 AUX terminal (_ 14)
Saving energy
This unit is designed to conserve its power consumption and save energy.
• This unit will automatically turn to standby mode after 30 minutes if it is inactive.
VQT2M 13