STEP 1 : Preparing the speakers
Caution
• Do not stand on the base• Be cautious when children are
near.
• When carrying speakers, hold the stand and base parts•
Preparation
• To prevent damage or scratches, lay down a soft cloth and
perform assembly on it.
• For wall mount, refer to page 40.
• Keep the screws out of reach of children to prevent
swallowing•
Back of the base
Pull the cable
straight along
the line and
slide into the
groove•
]
Screw A _ Tighten
securely•
@
!
:_ Leave about 80 mm (3 5/32")
Screw B
_ Insert the wire fully•
4-: White
+
-: Blue line
Push!
Press into the groove•
@ Tighten securely•
=!
!
!
!
! !
! !
=
=!
!
!
!
!
!
h .........
VQT2M 13
@
!
@ Screw
@ Slide into the groove.
_ Tighten securely.
!
Position the cable
between the ridges•
23 '
Leave about 120 mm (4 /321)
f_ Insert the wire fully. ]
--J 4-: White , |
-: Blue line _ |
, Push
\ _ Press into the groove.
$ _ Tighten securely.
!