Panasonic SC-BT730 Home Theater System User Manual


 
STEP 4: AC power supply cord connection
The illustration shows SC-BT730.
Wireless system
O AC power supply cord (included)
O To a household AC outlet
Main unit
O AC power supply cord (included)
O To a household AC outlet
Ferrite core
Connect only after all other connections are complete.
This unit consumes a small amount of AC power, even when it is turned off (rcJ_il rcJ_,_il: approx. 0.05 w*, rcJl_'_,l:approx.
0.1 w*, rcJ'_'1_!Wireless system: approx. 0.2 w). In the interest of power conservation, if you will not be using this unit for a long
time, unplug it from the household AC outlet.
*When the "Quick Start" setting is "Off"
The socket outlet shall be installed near the equipment and easily accessible. The mains plug of the power supply cord shall
remain readily operable. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug
from AC receptac e.
STEP 5: r rc Preparing the wireless system
Turn on the wireless system after all connections are complete.
Press [POWER __ I, II (_] on the wireless system.
Unit on/off button [POWER _ I, II (_]
._ I: The wireless system is on.
I (b: The wireless system is off.
Wireless system V_
WIRELESS LINK indicator
Red: The wireless system is on and the wireless link is deactivated.
Green : The wireless system is on and the wireless link is activated.
(" []" is also displayed on the main unit's display.)
VQT2M 13