Filter
Top Products
Speaker installation
option
Ir_€_,li'_,l
Surround speaker
Front speaker and surround speaker
Attaching to a wall
You can attach all of the speakers (except subwoofer) to a
wall.
• The wall or pillar on which the speakers are to be attached
should be capable of supporting 10 k_ (22 Ibs) per screw.
Consult a qualified building contractor when attaching the
speakers to a wall. Improper attachment may result in
damage to the wall and speakers.
• Do not attempt to attach these speakers to walls using
methods other than those described in this manual.
IrCrt,m,I
1 Drive a screw (not included) into the wall.
O At least 30 mm (1 3/le")
O fz;4.0 mm (%J')
• fz;7.0 mm to 9.4 mm (%2" to 3/8")
(D Wall or pillar
O 5.5 mm to 7.5 mm (7/32"to s/16")
2 Fit the speaker securely onto the screw(s)
with the hole(s).
Front speaker
Attach to a wall without the base and the stand.
rcrcml
--÷:;-:-_ "%4...
<5 ......................oo
rrr_
I_EI
_) 97 mm (3 Wle")
O 72 mm (2 27/32")
O 348.5 mm (13 23/32")
O In this position, the speaker will likely fall if moved to the
left or right.
VQT2M13 O Move the speaker so that the screw is in this position.
Center speaker
0 200 mm (7 7/8")
_) 100 mm (3 15/le")
Reattaching the speaker cable
Insert the cable
from the bottom.
Leave about
120 mm
(4 23/321')
Pull out the cable
through the hole.