Filter
Top Products
VQT2M13
Enjoying sound effects
from all speakers
2
Press [SURROUND] several times to select
the effect.
STAN DARD
Sound is output as it was recorded/encoded.
Speaker output varies depending on the source.
MULTI-CH
You can enjoy sound from the front speakers, as well as
the surround even when playing a 2-channel sound or
non-surround sound.
MANUAL
• The selected effect will only be displayed on the main
unit.
While "MANUAL" is displayed, press
[<, 1_] and select the desired effect.
DOLBY PL II MOVIE (Dolby Pro Logic II Movie)
Suitable for movie software, or the one recorded in
Dolby Surround.
DOLBY PL II MUSIC (Dolby Pro Logic II Music)
Adds 5.1-channel effects to stereo sources.
7.1CH VS (7.1CH Virtual Surround)
You can enjoy 6.1/7.1-channel surround-like effect
using 5.1-channel speakers.
S.SURROUND (Super Surround)
You can enjoy sound from all speakers with stereo
sources.
2CH STEREO
You can play any source in stereo. Sound will be
output to the front speakers and the subwoofer only.
• Adjusting speaker level during play
(_ Press and hold [-CH SELECT] to activate the speaker
setting mode.
@ Press [-CH SELECT] several times to select the speaker.
Each time you press the button:
L R-_> C-_> RS-_>RB*-_> LB*-_>LS-_> SW
I'
* When the optional surround back speakers are
connected.
L R: Front speaker (left and right: only the balance is
adjustable.)
• Press ['4, I_] to adjust the balance of the front
speakers.
C: Center speaker
RS: Surround speaker (right)
RB*: Surround back speaker (right)
LB*: Surround back speaker (left)
LS: Surround speaker (left)
SW: Subwoofer
• The channels not included in the playing audio will not be
displayed (subwoofer is displayed even if it is not
included).
Press [A] (increase) or [T] (decrease) to adjust the
speaker level for each speaker.
-6 dB to 4-6 dB
• Changing the sound modes
(_ Press [SOUND] several times to select the mode.
• The selected mode will only be displayed on the main
unit.
@ While the selected mode is displayed
Press [4, I_] and select the desired setting.
EQ: (Equalizer)
You can select sound quality settings.
FLAT
Cancel (no effect is added).
HEAVY
Adds punch to rock.
CLEAR
Clarifies higher sounds.
SOFT
For background music.
SUB W: (Subwoofer level)
You can adjust the amount of base.
1 (Weakest effect) to 4 (Strongest effect)
• The setting you make is retained, and recalled every
time you play the same type of source.
H.BASS
You can enhance low-frequency sound so that heavy
bass sound can be heard clearly, even if the acoustics
of your room are not optimal.
• The setting you make is retained, and recalled every
time you play from the same type of source.
C,FOCUS: (Center focus)
(Effective when playing audio containing center
channel sound.)
You can make the sound of the center speaker seem
like it is coming from within the TV.
W.SRND: (Whisper-mode Surround)
You can enhance the surround effect for low volume
sound. (Convenient for late night viewing.)
• Thesoundeffects/modesmay notbe availableorhavenoeffectwithsome
sources.
• Youmay experience a reductionin soundquality whenthesesound
effects/modesareusedwith somesources.Ifthisoccurs,turnthesound
effects/modesoff.