Filter
Top Products
ENGLISH
RQTV0156
29
➡ page 26 for basic operations
Set the dynamic range (the
difference between the loudest
and softest sounds) compression
for Dolby Digital. Use this function
when you have to turn the volume
down, such as late at night. It
compresses the dynamic range so
that you can still hear dialogue and
leave the sound field unaffected.
Select and confirm.
Select a level and confirm.
This function depends on the disc so it may not
work at times.
OFF: Off
STANDARD: The level recommended by
the producer of the software
for household viewing.
MAX: The maximum
allowable compression
(recommended for night
viewing)
Analogue input can cause
distortion and the “OVERFLOW”
warning to appear on the display.
Turn the attenuator on if this
occurs.
Select and confirm.
Select and confirm.
OFF: Off
ON: On
Factory setting: OFF
Delay audio if there appears to
be a difference in timing between
audio and pictures.
Select and confirm.
Select and confirm.
OFF: No delay
ON: Audio delayed
Factory setting: OFF
Do the necessary settings again
after this.
Select and confirm.
Select and confirm.
Select “NO” to cancel.
Input switches to TUNER after you select “YES”. (Preset channels remain intact.)
YES: Reset all settings to those made in
the factory
NO: Cancel
Specify the DVD equipment you
have connected to the HDMI
terminal.
To reduce standby power
consumption.
Choice for turning off the HDAVI
Control (➡ page 21).
•
•
•
Select and confirm.
Select and confirm.
Select the equipment
and confirm.
DVR: You have
connected a DVD
recorder (factory
setting)
DVD: You have
connected a DVD
player
Standby selection
Select and confirm.
Select and confirm.
Select and confirm.
OFF: Standby power consumption
reduced (approximately 0.35
W).
Signals from DVD
equipment cannot pass
through HDMI connection to
the television when the unit
is in standby (➡ page 5).
HDAVI Control (➡ page 21)
does not work when the unit
is in standby.
•
•
ON: Normal standby power
consumption (factory setting)
Select and confirm.
Select and confirm.
OFF: The Advance Dual Amp is off
AUTO: The Advanced Dual Amp works
when possible
Factory setting: AUTO
Select “OFF” to cancel.
HDMI settings
Turning the
ADVANCED DUAL
AMP off
Clear audio at low
volume
Attenuating analogue
input
Delaying audio
Resetting factory
settings
3
3
3
2
3
2
3
2
3
2
3
2
Note
Note
Receiver settings
Factory setting: OFF
Selecting Input
HDAVI Control
Select and
confirm.
Select and
confirm.
Select and
confirm.
3
3
OFF: HDAVI Control
is OFF
ON: HDAVI Control
is ON (factory
setting)
2a
2b
2a
2b
2a
2b
Factory setting: YES
SA-XR58.indb 29 6/27/2006 6:55:26 PM