Filter
Top Products
ENGLISH
RQTV0156
19
Enjoying Home Theater features
Digital signals this unit can play
Dolby Digital (including
Dolby Digital Surround
EX)
These digital surround systems were developed by Dolby Laboratories. Dolby
Digital Surround EX, with its additional surround back channels, produces an
increased sense of realism.
DVD etc.
DTS (including DTS-ES
and DTS 96/24)
These digital surround systems were developed by DTS (Digital Theater
Systems, Inc.). DTS-ES, with its additional surround back channel, immerses
you in sound. DTS 96/24 delivers multi-channel sound with superior fidelity (96
kHz/24 bit).
DVD etc.
PCM
You can input PCM signals with sampling frequencies up to 192 kHz with the
DIGITAL IN COAXIAL 1 terminal. The other digital terminals allow input of up to
96 kHz. The display shows the sampling frequency when you input 88.2-kHz,
96-kHz, 176.4-kHz, or 192-kHz signals.
CD, DVD-
Audio etc.
This unit cannot process Dolby Digital RF or MPEG audio signal.
Note
Dolby Pro LogicΙΙx, NEO:6, and SFC add surround effects by “adding” channels, so if they are off, the unit plays the number of channels recorded in
the original source.
For example, if it is a 5.1-channel source, there will be no output from the surround back speakers.
The SURROUND mode turns off when input is 192-kHz PCM.
Whenever you switch to a different source, the following display appears to show you the number of channels. (It may not appear with some
sources.)
•
•
•
Subwoofer
Surround and surround back channels
Front and center channels
Signal indicators
A B
2CH MIX
SPEAKERS
BI-WIRE
TUNED
MONO ST
SLEEP
PCM
DTS
96/24DTS
-ES
DIGITAL EX
EX
PLⅡx NEO:6 SFC
M
DIGITAL INPUT
kHz
MHz
PS
PTY
cm
RDS
DIGITAL: Dolby Digital sources DTS: DTS sources
DIGITAL EX: Dolby Digital Surround EX decoder (while in Dolby Pro
LogicΙΙx mode) when the input signal is Dolby Digital 5.1-
channel or Dolby Digital Surround EX and you are using one
surround back speaker.
DTS 96/24: DTS 96/24 sources
EX: Dolby Digital Surround EX decoder (while in Dolby Pro
LogicΙΙx mode) when the input signal is DTS 5.1-channel and
you are using one surround back speaker.
DTS-ES: DTS-ES Discrete 6.1 sources or when using
the DTS-ES matrix
PLΙΙx: Dolby Pro LogicΙΙx decoder
NEO:6: DTS NEO:6 matrix
PLΙΙ: Dolby Pro LogicΙΙ with stereo sources when you are not
using a surround back speaker.
SFC: Sound field control
For your reference
SA-XR58.indb 19 6/27/2006 6:55:07 PM