Filter
Top Products
RQT5142
23
Reference
Using auxiliary equipment
You can play or record sound from other equipment through
this unit's AUX IN terminal.
Plug type: 3.5 mm stereo
Playback
Preparation: (when using batteries) Press [
].
Press [ ] to switch to AUX mode.
Start playback on the equipment.
Recording
Do steps and as described above.
Press [ ].
When this unit and the other equipment are connected to
each other, do not set input on both unit's to
“
AUX
”
. This
can cause feedback noise to occur.
Using headphones
(not included)
Reduce volume before connection.
Avoid listening for prolonged periods of time to prevent hear-
ing damage.
Plug type: 3.5 mm stereo
Maintenance
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in
a soap-and-water solution or a weak detergent solution.
•
Never use alcohol, paint thinner, or benzine to clean this unit.
•Before using chemically treated cloth, read the instructions
that came with the cloth carefully.
For a cleaner crisper sound
Clean the
heads regularly to assure good quality playback
and recording. Use a cleaning tape (not included).
OUT
AUX IN
PHONES
Page 23