Filter
Top Products
RQT5142
15
Cassette deck operations
Cassettes
Tape Program Sensor (TPS)
TPS finds the beginning of a track and resumes play from
there.
During play
Press [ REW–TUNE/
] (backward)
or [ TUNE/
–FF] (forward).
Each press increases the number of tracks skipped (up to 9).
TPS may not operate correctly in the following situations:
•If the interval between tracks is less than 4 seconds.
•If there is noise between tracks.
•If there are silent parts within tracks.
TPS stops if you start play, rewind or fast-forward on the
other deck.
To switch decks
Press [DECK 1/2].
The deck currently selected is displayed.
•The unit automatically selects the deck when a cassette
is loaded.
•Operations on the current deck stop when an operation is
started on the other deck.
Selecting reverse mode
Remote control only
Press [REV MODE].
Each time the button is pressed
: Plays top side to bottom side then stops
: Plays continuousy until [ ] is pressed
: Plays one side only
To play two cassettes in succession
Press [REV MODE] so “ ” is displayed.
Press [ ] to start play.
Play continues until [ ] is pressed
You can also press [DECK 1/2] to select the deck to play
first.
1234567
321123
FF
REW
TUNE
Number of tracks skipped
Current track
Number of times the
button is pressed
Play from this point
Current deck
Page 15