RQT5142
21
Timer operations
Using the timer
To cancel the timer
Press [
PLAY/REC] to clear the timer indicator from the
display.
The timers come on at the same time everyday until they
are canceled.
Checking the settings
Press [CLOCK/TIMER] when the unit is off.
The settings are shown in the following order.
Start time, Finish time Source Volume Clock
To change the settings
To change the times
Do steps , , , and .
To change the source
Turn the unit on, choose the source and press [
PLAY/REC]
to turn the timer on ( step ).
You can enjoy other sources after you have set
the timer.
The timer will come on under the same conditions the unit
was in when [
PLAY/REC
] is pressed to turn the timer on
( step ). Before turning the power off, check tape direc-
tion if you played cassettes.
The sleep timer
Remote control only
Set the unit to stop and turn off after a certain time.
While listening to a CD, a cassette, or the radio.
Press [SLEEP] to select the time (in minutes).
Each time the button is pressed
SLEEP 30 SLEEP 60 SLEEP 90
SLEEP OFF
SLEEP 120
To cancel
Press [SLEEP] to select
“
SLEEP OFF
”
.
To check the remaining time
Press [SLEEP] once.
The remaining time is shown for about 5 seconds.
To change the time.
Press [SLEEP] to select the new time.
The sleep timer can be used in combination with the play
and record timers. Make sure the unit is off before the play
or record timer's set start time.
Page 21