Filter
Top Products
RQT7114
8
Before use
Connections
Connecting with the DJ mixer
This example indicates a connection with the SH-MZ1200 DJ mixer (not included) and two digital turntables. Use the stereo connection cable
(supplied accessories) and control cable (not included) to connect the main unit with the DJ mixer. Turn off all power when connecting component
equipment.
Connect the AC power supply cord after all other connections have been connected.
Stereo connection cable
White (L)
Red (R)
Connection to the SL-DZ1200 rear panel CONTROL terminal
Only the direct drive digital turntable or the separately sold
DJ Mixer can be operated.
Connecting to control terminals of other manufacturer’s products
may result in incorrect operation or other equipment problems.
Rear panel
Direct drive digital turntable 2
Connects to DJ mixer CH4.
Rear panel
Direct drive digital turntable 1
Connects to DJ mixer CH1.
Type: 6.3 mm
(1/4 in.) stereo
Headphone
(not included)
AC power supply
cord (supplied
accessories)
Household
AC outlet
Type: 6.3 mm
(1/4 in.) stereo
Headphone
(not included)
AC power
supply cord
(supplied
accessories)
Household
AC outlet
Control cable
(not included)
Type:
3.5 mm (1/8 in.) stereo
When connecting for
fader start play
(
page 23)
DJ mixer rear panel
Control cable
(not included)
Type:
3.5 mm (1/8 in.) stereo
Connecting with other mixers
Do not connect with the PHONO terminal. Connecting will result in excessive sound being generated and may result in serious damage
to your equipment.
Connect the main unit’s LINE OUT terminal with the mixers LINE input terminal or AUX input terminal.
Listening with the headphones
•When connecting the headphones, reduce the volume using the phones VOLUME control.
•Avoid listening for prolonged periods of time to prevent hearing damage.