Filter
Top Products
21
Cassette Deck/VCR Features
Playing and Recording
Video Tapes
You can connect two video sources to the receiver. If you connect a VCR
to the
VCR/TAPE 1
and
DVD/TV
or
LD/SAT
audio and video jacks, you can copy
video cassette tapes from one VCR to another and monitor the dubbing
process.
Playing a Video Tape
To play a video tape, load the tape into the VCR connected to either
VCR/
TAPE 1
,
DVD/TV
, or
LD/SAT
. Press the button (
VCR/TAPE 1
,
DVD/TV
, or
LD/SAT
)
that corresponds to the jack the VCR is connected to.
VCR, DVD/TV, or
LD/SAT
appears on the display. Follow the VCR’s instructions to begin
playback. If you connected a monitor to the receiver’s
TO MONITOR TV 1
and
2
jacks, you can view the program on that monitor.
Copying a Video Tape
Follow these steps to copy a video tape from one VCR to another
through the STAV-3780.
1. Insert the tape you want to copy into the VCR connected to
DVD/TV
or
LD/SAT
.
2. Insert a blank tape (or one you want to record over) into the VCR
connected to the
VCR/TAPE 1
jack.
3. Press
DVD/TV
or
LD/SAT
.
4. Begin recording and playback on the VCRs.
Important: Most material performed in public, such as concerts, plays,
and movies, or distributed on prerecorded video tapes is copyrighted.
The unauthorized recording or duplication of copyrighted material is a
violation of the copyright laws of most countries and such duplication
may result in fines, imprisonment, or both. Note, however, that in the
United States, it is not a violation of U.S. copyright laws for a consumer
to record a broadcast television program for private (in-home) viewing.