Filter
Top Products
30
If you break off a tab and decide later that you want to record on that side of the tape,
carefully cover that side’s tab hole with a piece of adhesive tape.
Caution: Removing the erase-protection tape does not prevent a bulk eraser from
erasing a cassette tape.
Restoring Tape Tension and Sound Quality
After you play a cassette tape several times, the tape might become tightly wound
on the reels. This can cause playback sound quality to deteriorate.
To restore the sound quality, fast-forward the tape from the beginning to the end of
one side, then completely rewind it. Then loosen the tape reels by gently tapping
each side of the cassette’s outer shell on a flat surface.
Caution: Be careful not to damage the cassette when tapping it. Do not touch the
exposed tape or allow any sharp objects near the cassette.
14-547.fm Page 30 Wednesday, June 30, 1999 4:23 PM