Filter
Top Products
22
Note: You must complete Steps 2-
5 within about 10 seconds of one
another. If MEMORY disappears,
you must start over again from
Step 1.
2. To select the desired track, press
or (or SKIP/TUNING s
or t on the remote control).
Note: You cannot select tracks for
a programmed sequence using
the number buttons on the remote
control.
3. To store the selected track, press
PROGRAM/MEMORY again. The
memory position number automat-
ically increases by 1, indicating
the CD-3322 is ready to store the
next track.
4. Repeat Steps 2-3 to store up to 20
tracks.
Note: If you try to store more than
20 tracks, the CD player automati-
cally returns to the first memory
position and stores new tracks
over the old ones.
5. Press (or PLAY/PAUSE on
the remote control) to play the
programmed tracks. The first pro-
grammed track number then the
elapsed play time appears, and
the CD begins to play starting with
the first programmed track.
Notes:
• You can repeat (all), skip over,
or search through programmed
tracks.
• To briefly stop programmed
play, press (or PLAY/
PAUSE on the remote control).
The elapsed play time flashes
on the display. To resume play,
press it again.
6. Adjust VOLUME UP or DOWN (or
VOLUME or on the remote
control), and select the desired E-
BASS, BALANCE, and preset
equalizer settings.
illustration
illustration
14-547.fm Page 22 Wednesday, June 30, 1999 4:23 PM