Filter
Top Products
23
7. Programmed play automatically
stops at the end of the last pro-
grammed track. To stop it sooner,
press (or STOP on the remote
control). The CD’s total number of
tracks and playing time appear.
Notes:
• Repeat Steps 1 and 5 to play the
programmed sequence again.
• To resume regular or random play
after playing a programmed
sequence, you must first erase the
programmed sequence (see
“Erasing a Programmed Se-
quence”).
Reviewing/Replacing a Programmed
Sequence
To review a programmed sequence,
while play is stopped, repeatedly press
PROGRAM/MEMORY. As you press it,
MEMORY and TRACK flash, and the CD
number, track number, and memory
position number of each stored track
appear on the display for a few sec-
onds.
To replace a programmed track, press
PROGRAM/MEMORY until the memo-
ry position number of the track you
want to replace appears on the display.
Then repeat Steps 2 and 3 listed in
“Storing/Playing a Programmed Se-
quence” to select and store the new
track.
Erasing a Programmed Sequence
You can do any of the following to
erase a programmed sequence:
• Press PROGRAM/MEMORY then
(or STOP on the remote con-
trol) before or after programmed
play.
• Press OPEN
s
before or after pro-
grammed play.
• Press POWER to turn off the CD-
3322.
illustration
illustration
14-547.fm Page 23 Wednesday, June 30, 1999 4:23 PM