Filter
Top Products
REMOVING THE STEREO FROM THE DASH
Follow these steps to remove the stereo from the dash.
1. Disconnect the cable from the vehicle's negative (-) battery terminal.
2. If you secured the stereo to an existing mounting hole under the dash,
slide out the stereo to free the mounting bolt from the mounting hole.
Or, remove the nut holding he metal strap to the back of the stereo.
3. Press REL to remove the stereo's control panel.
4. Snap the plastic collar off of the front of the stereo.
5. With the supplied key's tabs facing inward, insert both of the keys
into the slots between the mounting sleeve and the stereo and press
the keys toward the back of the stereo. The stereo is loosened from
the sleeve.
6. Remove the keys from the slots and slide the stereo all the way out of
the sleeve.
7. Disconnect the wiring harness and the antenna.
8. Reconnect the cable to the vehicle's negative (-) battery terminal.