Filter
Top Products
To select a stored station, press BAND to select the correct memory group.
Then briefly press the desired memory location button. (Do not hold down
the memory location button. This erases the previously stored station and
stores the currently tuned station into that location.)
Scanning Stored Stations
The stereo's automatic memory scan (AMS) feature scans all stored stations
in a selected memory group, pausing for 5 seconds at each stored station.
1. Press BAND until the stereo displays the memory group you want to
scan.
2. To start automatic memory scan, briefly press AMS. As each stored
frequency plays, the current memory location number flashes. (Do not
hold down AMS. This causes the radio to automatically seek for and
store six stations into the selected memory group.)
3. To stop scanning when the stereo pauses at a station, briefly press
AMS. Otherwise, the stereo continues to scan the memory group.
CASSETTE PLAYER OPERATION
PLAYING A CASSETTE
CAUTION: We recommend using C-60 or C-90 cassette tapes. Avoid using
C-120 cassette tapes. They are very thin and can easily become
tangled in the tape-handling parts.
Follow these steps to play a tape.
1. Take up any slack by turning the cassette's hub with your finger or a
pencil. Avoid touching the tape.
2. Insert the tape into the cassette compartment with its open edge to
the right.
The tape begins to play, and the direction indicator (>) or (<)
appears.
3. If you are playing a metal tape, press MTL until MTL appears on the
display.
4. If you are playing a tape encoded with the Dolby B NR system, press
[)][(]. [)][(] appears.