Onkyo TX-8255 Stereo System User Manual


 
5
Supplied Accessories
Make sure you have the following accessories:
* In catalogs and on packaging, the letter at the end of the
product name indicates the color. Specifications and
operation are the same regardless of color.
Notes:
If the remote controller doesn’t work reliably, try
replacing the batteries.
Don’t mix new and old batteries or different types of
batteries.
If you intend not to use the remote controller for a long
time, remove the batteries to prevent damage from
leakage or corrosion.
Expired batteries should be removed as soon as
possible to prevent damage from leakage or
corrosion.
Features
Newly Designed, Brushed Hairline Aluminum
Front Panel
50 Watts/Channel @ 8 ohms (FTC)
(North American model)
90 Watts/Channel @ 4 ohms (IEC)
(European and Australian model)
WRAT (Wide Range Amplier Technology)
High-Current, Low-Impedance Drive
Discrete Output Stage Circuitry
5 Audio Inputs (CD, TAPE 1, TAPE 2, LINE 1/
DVD, LINE 2) and 2 Outputs
Phono Input
Speaker A/B Terminals
RDS (PS/PTY/RT/TP) (European model)
IR Input/Output
Banana Plug-Compatible Speaker Posts
(North American model)
Compatible with RI Dock for the iPod
Remote controller and two batteries (AA/R6)
Indoor FM antenna
AM loop antenna
Installing the Batteries
1
Detach the battery cover by pressing the
tab and pulling up the cover.
2
Insert two AA-size batteries into the
battery compartment.
Carefully follow the polarity diagram (positive +
and negative - symbols) inside the battery
compartment.
3
After batteries are installed and seated
correctly, attach the compartment cover.