Filter
Top Products
33
Specifications
Amplifier Section
Tuner Section
■ FM
■ AM
General
■ Audio Inputs
■ Audio Outputs
Specifications and features are subject to change without
notice.
Rated Output Power (FTC) (North American)
All channels: 50 watts minimum continuous power
per channel, 8 ohm loads, 2 channels
driven from 20 Hz to 20 kHz, with a
maximum total harmonic distortion of
0.08 %
Rated Output Power (IEC) (European and Australian)
2 ch
× 90 W at 4 ohms, 1 kHz, 1 ch driven
Maximum Output Power (JEITA) (Asian)
90 W at 4 ohms, 1 kHz, 2 ch driven
Dynamic Power
North American: 135 W + 135 W (2 Ω)
105 W + 105 W (4 Ω)
70 W + 70 W (8 Ω)
European and Australian:
110 W + 110 W (2 Ω)
90 W + 90 W (4 Ω)
55 W + 55 W (8 Ω)
THD (Total Harmonic
Distortion) 0.08 % (Power Rated)/ 0.08 % (1 kHz,
1 W)
Damping Factor 60 (Front, 1 kHz, 8 Ω)
Input Sensitivity and
Impedance 150 mV/ 50 kΩ (LINE)
2.5 mV/ 50 kΩ (PHONO MM)
Output Level and
Impedance 150 mV/ 2.2 kΩ (REC OUT)
Frequency Response 10 Hz–100 kHz/ +1 dB–3 dB (CD)
Tone Control ±10 dB, 100 Hz (BASS)
±10 dB, 10 kHz (TREBLE)
Signal to Noise Ratio 100 dB (LINE, IHF-A)
80 dB (PHONO, IHF-A)
Speaker Impedance 4 Ω–16 Ω
Tuning Frequency
Range North American: 87.5 MHz– 107.9 MHz
Others: 87.5 MHz– 108.0 MHz
Tuning Frequency
Range North American: 530 kHz–1710 kHz
Others: 522 kHz–1611 kHz
Preset Channel 40
Power Supply North American: AC 120 V, 60 Hz
European: AC 230-240 V, 50 Hz
Others: AC 230-240 V, 50Hz
Power Consumption North American: 2.1 A
European: 180 W
Others: 180 W
Standby Power
Consumption North American: 0.2 W
Others: 0.3 W
Dimensions
(W
× H × D)
435 × 149 × 340 mm
17-1/8"
×
5-7/8"
×
13-3/8"
Weight 7.5 kg
16.5 lbs.
Analog Inputs PHONO, CD, TAPE 1, TAPE 2, LINE 1,
LINE 2
Analog Outputs TAPE 1, TAPE 2
Speaker Outputs SPEAKERS A
SPEAKERS B
Phones 1
IR Input/Output 1/1