Filter
Top Products
24
Recording—Continued
Monitoring the Recorded Sound
When you record audio signal on a recording component
connected to the TAPE 2 OUT jacks, you can monitor
the recorded sound. The recorded sound monitoring
function allows you to compare the sounds by switching
the output between the sound before or after recording.
The signal flow in monitoring the recorded sound
The signal flow in monitoring the sound before
recording
Pressing the TAPE 2 MONITOR
button indicates a sign
“T2 MONITOR OFF” on the
display. Press and hold the
button while the sign is
displayed, and release it when
the sign changes to
“T2 MONITOR ON.”
Then you will see a sign “> T-2 ON”
next to the input source name in the
display. However, only “>” is displayed
if a tuner is selected for input source.
Use the same procedures to deactivate
the sound monitoring function.
T2 MONITOR OFF
T2 MONITOR ON
TAPE 2
TAPE 2
button
Amplifier
PLAY REC
Input source
(CD, FM, etc.)
Receiver
T2 MONITOR OFF
TAPE 2
button
Amplifier
PLAY REC
Input source
(CD, FM, etc.)
Receiver