Filter
Top Products
16
Connecting Your Components—Continued
To connect recording components, such as cassette deck,
MD recorder and CD recorder, use an analog audio cable
to connect the receiver’s TAPE 1 or 2 IN L/R jacks to the
cassette deck’s analog audio output jacks, and use
another analog audio cable to connect the receiver’s
TAPE 1 or 2 OUT L/R jacks to the cassette deck’s analog
audio input jacks, as shown.
When you want to monitor the recorded sound, use the
TAPE 2 jacks for connecting a recorder.
Use an analog audio cable to connect the TAPE 1 IN L/R
jacks to the RI Dock’s analog audio output jacks. Then
use an cable to connect the receiver’s jack to the
RI Dock’s jack, as shown.
When you change the input display name to “HDD,” you
can operate the RI Dock using the remote controller
supplied with the receiver (see page 19).
Note:
If you use the Onkyo Remote Interactive Dock (DS-A1),
flip the RI MODE switch to “HDD” which is located on
the underside.
Only audio input from the DVD player can be received.
The video input from the DVD player should be
connected to the TV directly.
Use an analog audio cable to connect the LINE 1/DVD
IN L/R jacks to the analog audio output jacks on the
DVD player.
Connecting a Recording Component
Connecting a Remote Interactive
Dock (RI Dock)
(IN)
REC
(OUT)
PLAY
/
R
AUDIO OUT
-
-
-
-
L
TAPE 1
Remote Interactive
Dock
Connecting a DVD Player
AUDIO
OUT
LR
LINE 1
/DVD
IN
L
R