Onkyo T-4555P Radio User Manual


 
27
Using Presets
You can store any combination of up to 40 of your
favorite AM, FM, and XM Satellite radio stations as
presets.
Using the T-4555P:
Using the PRESET buttons:
Using the Auto Scan function:
Using the T-4555P:
Presetting Your Favorite Stations
1
Tune into the station that you
want to store as a preset.
2
Press the [MEMORY] button.
The MEMORY indicator appears and
the preset number flashes.
3
While the MEMORY indicator is
displayed (about 8 seconds), use
the PRESET [ ]/[ ] buttons to
select a preset from 1 through 40.
4
Press the [MEMORY] button
again to store the station or
channel.
The station or channel is stored and the
preset number stops flashing.
Repeat this procedure for all of your
favorite radio stations.
PRESET –/+
AUTO SCAN
MEMORY
TUNING MODE
AUTO SCAN
PRESET
/
Selecting Presets
To select a preset, use the
T-4555P’s PRESET [ ]/[ ] but-
tons, or the remote controller’s
PRESET [+]/[–] buttons.
Press the [AUTO SCAN] button.
The Auto Scan function automatically
selects and outputs each radio preset in
turn for 5 seconds.
When you hear the station that you
want to listen to, press the [AUTO
SCAN] button again to stop auto scan-
ning.
Deleting Presets
1
Select the preset that you want to
delete.
See the previous section.
2
While holding down the [MEM-
ORY] button, press the [TUNING
MODE] button.
The preset is deleted and its number
disappears from the display.
Remote controller
Remote controller
T-4555P_En.book Page 27 Wednesday, August 9, 2006 3:42 PM