Filter
Top Products
23
Using the Timers
—Continued
This section explains how to set the timers.
Notes:
•You must set the clock before you can set a timer (see
page 14).
•To use a timer to start radio playback (FM/AM), you
must preset a station first (see page 16).
•You cannot change a timer’s start or end time while
timed playback or recording is in progress.
• If at any point during this procedure you don’t do
anything for more than 60 seconds, the previous dis-
play will appear and the procedure will be cancelled.
• When the specified time comes, all connected system
components will automatically switch to Standby.
Timers can be set from the T-433’s front panel or the
A-933’s remote controller. Where different, the name of
the remote controller’s button is shown in parentheses.
Before proceeding, turn on the T-433.
Note:
Only consecutive days can be selected. You cannot, for
example, select Monday, Wednesday, and Friday.
Setting the Timers
1
<Select a Timer>
Press the [TIMER] button repeat-
edly to select a timer.
You can select TIMER1, TIMER2,
TIMER3, or TIMER4.
If TIMER1–4 don’t appear, this means
that the clock has not yet been set (see
page 14).
Press the [MEMORY] button
(ENTER).
STANDBY/ON
STANDBY
DISPLAY
ACCUCLOCK TUNING PRESET
KEY MODE TIMER
BAND TUNING
/
PRESET
FM MODE
CLEAR
MEMORY
MEMORY
TUNING/PRESET
TIMER
PRESET
VOLUME
VOLUME
PRESET
CLOCK
CALL
SLEEP
INPUT
R
C
-
613
S
TIMER
ENTER
MEMORY REPEAT DISPLAY
RANDOM P MODE SCROLL
MUTING
/ button
TIMER
ENTER
ENTER
TIMER
TIMER
MEMORY
<Remote controller>
➜
➜
2
<Selecting the Timer Type>
Use the TUNING/PRESET
[ ]/[ ] buttons (TIMER
[ ]/[ ]) to select the type of
timer.
You can select PLAY or REC.
Press the [MEMORY] button
(ENTER).
3
<Select the Playback Component>
Use the TUNING/PRESET
[ ]/[ ] buttons (TIMER
[ ]/[ ]) to select the playback
component.
You can select FM, AM, MD, LINE, or
CD.
Press the [MEMORY] button
(ENTER)
If you selected FM or AM, use the
TUNING/PRESET [ ]/[ ] buttons
to select a radio preset, and then press
the [MEMORY] button (ENTER).
TUNING
/
PRESET
ENTER
MEMORY
<Remote controller>
➜
➜
Or
TUNING
/
PRESET
ENTER
MEMORY
<Remote controller>
➜
➜
*En_T433_02.fm Page 23 Tuesday, February 15, 2005 3:09 PM