Onkyo SR607 Stereo System User Manual


 
99
Controlling Other Components—Continued
By pressing the REMOTE MODE button that’s been
programmed with the remote control code for your cas-
sette recorder, you can control your cassette recorder
with the following buttons.
The [TV/TAPE] button is preprogrammed with the
remote control code for controlling an Onkyo cassette
recorder when used with an connection.
For details on entering a remote control code for a differ-
ent component, see page 91.
On twin cassette decks, only Deck B can be controlled.
ON/STANDBY button
Turns the cassette recorder on or off.
Previous and Next [ ]/[ ] buttons
The Previous [ ] button selects the previous
track. During playback it selects the beginning of
the current track. The Next [ ] button selects the
next track.
Depending on how they were recorded, the Previous
and Next [ ]/[ ] buttons may not work prop-
erly with some cassette tapes.
Rewind and Fast Forward [ ]/[ ]
buttons
The Rewind [ ] button starts rewind. The Fast
Forward [ ] button starts fast forward.
Reverse Play [ ] button
Starts reverse playback.
Play [ ] button
Starts playback.
MUTING button (53)
Mutes or unmutes the AV receiver.
VOL [ ]/[ ] button (51)
Adjusts the volume of the AV receiver.
Stop [ ] button
Stops playback.
Note:
An Onkyo cassette recorder connected via can also
be controlled in Receiver mode.
Controlling a Cassette Recorder
* With some components, certain buttons may not work as
expected, and some may not work at all.
Press the appropriate
REMOTE MODE button first