Filter
Top Products
60
UP-A1 series Dock for iPod—Continued
Arrow [ ]/[ ] and ENTER buttons
Used to navigate menus and select items.
Previous [ ] button
Restarts the current song. Press it twice to select the
previous song.
Rewind [ ] button
Press and hold to rewind.
Pause [ ] button
Pauses playback.
REPEAT button
Used with the repeat function.
MUTING button (53)
Mutes or unmutes the AV receiver.
ALBUM +/– button
Selects the next or previous album.
VOL [ ]/[ ] button (51)
Adjusts the volume of the AV receiver.
PLAYLIST [ ]/[ ] buttons
Selects the previous or next playlist on the iPod.
RETURN button
Exits the menu or returns to the previous menu.
Play [ ] button
Starts playback. If the component is off, it will turn
on automatically.
Next [ ] button
Selects the next song.
Fast Forward [ ] button
Press and hold to fast forward.
Stop [ ] button
Stops playback and displays a menu.
RANDOM button
Used with the shuffle function.
Status messages
Note:
In case of a transmission error without a status message
appearing in the front panel, check the connection to
your iPod.
❏ UP-A1 series Dock in connection with the
check
This unit is in the middle of recognizing the connection
with your iPod.
This unit is in the middle of acquiring song lists from
your iPod.
❏ UP-A1 series Dock does not support the
control
The iPod being used is not supported by this unit.
❏ UP-A1 series Dock is connected
Your iPod is properly stationed in a UP-A1 series Dock
connected to the UNIVERSAL PORT jack of this unit,
and the connection between your iPod and this unit is
complete.
When connection is confirmed, “UP-A1” is displayed
for about 8 seconds.
❏ UP-A1 series Dock is not connected
Your iPod was removed from a UP-A1 series Dock con-
nected to the UNIVERSAL PORT jack of this unit.
Station your iPod back in a UP-A1 series Dock con-
nected to the UNIVERSAL PORT jack of this unit.