Onkyo SR607 Stereo System User Manual


 
40
First Time Setup—Continued
HDMI Input Setup
If you connect a video component to HDMI IN, you
must assign that input to an input selector. For example,
if you connect your DVD player to HDMI IN1, you must
assign HDMI IN1 to the DVD/BD input selector.
If you’ve connected your TV to the AV receiver with an
HDMI cable, you can set the AV receiver so that
composite video and component video sources are
upconverted* and output by the HDMI OUT. You can set
this for each input selector by selecting the “- - - - -”
option.
Notes:
For composite video and component video
upconversion for the HDMI OUT, the HDMI Input
setting must be set to “- - - - -”. See page 25 for more
information on video signal flow and upconversion.
When an HDMI IN is assigned to an input selector as
explained here, the digital audio input for that input
selector is automatically set to the same HDMI IN.
See “Digital Input Setup” on page 42.
The TUNER input selector cannot be assigned and is
fixed at the “- - - - -” option.
If you connect an input component (such as UP-A1
series Dock that seated iPod) to the UNIVERSAL
PORT jack, you cannot assign any input to PORT
selector.
Do not assign the component connected with the
HDMI input to the TV/TAPE selector when you set
“TV Control” setting to “On” (see page 82).
Otherwise, appropriate CEC (Consumer Electronics
Control) operation is not guaranteed.
This procedure can also be performed on the AV
receiver by using its [SETUP] button, arrow buttons,
and [ENTER] button.
Video Input Setup
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
2
Use the Up and Down [ ]/[ ] but-
tons to select “1. Input Assign”,
and then press [ENTER].
The “Input Assign” menu appears.
3
Use the Up and Down [ ]/[ ] but-
tons to select “1. HDMI Input”,
and then press [ENTER].
The “HDMI Input” menu appears.
IN
OUT
Composite video,
component video
Composite video,
component video
HDMI
HDMI
1. Input Assign
1. HDMI Input
2. Component Video Input
3. Digital Audio Input
1–1. HDMI Input
DVD/BD
VCR/DVR
CBL/SAT
GAME
AUX
TV/TAPE
TUNER
CD
PORT
HDMI1
HDMI2
HDMI3
HDMI4
FRONT
- - - - -
- - - - -
- - - - -
- - - - -
4
Use the Up and Down [ ]/[ ] but-
tons to select an input selector,
and use the Left and Right [ ]/
[ ] buttons to select:
HDMI1, HDMI2, HDMI3, HDMI4,
HDMI5:
Select the HDMI IN to which
the video component has
been connected.
FRONT:The front HDMI IN can be
assigned to an AUX input
selector only.
-----: Output composite video and
component video sources
from the HDMI OUT. The
video output signal from the
HDMI OUT is the one con-
figured in “Component Video
Setup” (see page 41).
Each HDMI IN cannot be assigned to
more than one input selector. When
HDMI1 - HDMI5 have already been
assigned, you must set first any unused
input selectors to “- - - - -” or you will
be unable to assign HDMI1 - HDMI5
to input selector.
5
Press the [SETUP] button.
The setup menu closes.