Filter
Top Products
46
4-1. Volume Setup sub-menu
This sub-menu allows you to make various settings concerning the
volume control of the TX-DS989.
Preference
4. Preference menu
This menu provides settings for you to customize certain functions
of the TX-DS989 as you wish.
Menu
1.Speaker Setup
2.Input Setup
3.Listening Mode Setup
4.Preference
5.Zone2 OSD Setup
6.About
Select: Exit:|EXIT|
Enter:|ENTER| Quit:|OSD|
1
2
3
4
5
6
7
8
9
0
1
2
123456789012345678901234
4.Preference
1.Volume Setup
2.OSD Setup
3.OSD Tweak
Quit:|OSD|
Menu
1.Speaker Setup
2.Input Setup
3.Listening Mode Setup
4.Preference
5.Zone2 OSD Setup
6.About
Select: Exit:|EXIT|
Enter:|ENTER| Quit:|OSD|
1
2
3
4
5
6
7
8
9
0
1
2
123456789012345678901234
4.Preference
1.Volume Setup
2.OSD Setup
3.OSD Tweak
Quit:|OSD|
1
2
3
4
5
6
7
8
9
0
1
2
123456789012345678901234
4-1.Volume Setup
a.Volume Display
:Absolute
b.Muting Level
:-50dB
c.Maximum Volume
:Off
d.Power On Volume
:Last
Quit:|OSD|
a. Volume Display
You can choose from two ways of displaying the volume setting
on screen.
Absolute: This displays the volume with a minimum of min
(0) for no sound and a maximum of max (100). As a reference,
the volume setting of Ref (82) is used as the 0 -decibel for the
relative display method.
Relative: This displays the volume as a decibel value on a
scale with a designated reference point that is displayed as 0,
which equals the volume setting of 82 for the absolute display
method. With this display method, the minimum value is -∞,
the next highest is -81, and the maximum value is +18.
b. Muting Level
This sets the attenuation level during playback when the Muting
button is pressed on the remote controller. This can be set between
-∞, -50 and -10 decibels in 10-decibel increments.
c. Maximum Volume
This sets a maximum limit for the master volume to reduce the
chance of any components becoming damaged from accidental
increases to the volume. For the absolute volume display method,
this can be set between 50 and 90. For the relative volume display
method, this can be set between -32 and +17 decibels.
d. Power On Volume
This sets a designated volume setting for the TX-DS989 to be set
every time that the power is turned on. This prevents the TX-
DS989 from being turned on while it is set to an extremely high
volume and suddenly output very loud sounds. For the absolute
volume display method, this can be set between 0 and 99. For the
relative volume display method, this can be set between -∞ and
+18 decibels. If you do not mind having the TX-DS989 turned on
with its current volume setting, set this to “Last Valid.”