Filter
Top Products
10
Off
When not using either Rec Out or Zone 2, press that button and
then press the Off button to turn off the signal. If the Rec Out or
Zone 2 signal is turned on and the connected component is not
turned on, the electric signal will still be sent through the circuitry
and the excess load may cause deterioration of the audio signal.
DSP
Press these buttons to scroll through the listening modes and set a
new one for the input source you are currently listening to. For
each different input signal, different listening modes are possible.
See page 38 for a detailed explanation of the different listening
modes.
Dimmer
Press to set the brightness of the front display. There are 4 settings
available: normal, dark, very dark, and off.
• The dimmer control for the front display can be performed at
the remote controller.
Tuning
Use these buttons to change the tuner frequency. The tuner
frequency is displayed in the front display and it can be changed in
50 kHz increments for FM and 10 kHz increments for AM. When
a station is tuned into, “> <” or “
” will appear in the front
display.
When FM is selected, you can hold down one of the tuning buttons
and then release it to activate the auto-search feature. It will search
for a station in the direction of the button you pressed and stop
when it tunes into one.
Preset
When AM or FM is selected as the input source, press one of these
buttons to jump to a radio station that you preset using the
MEMORY button. Pressing the right button moves from the most
recently preset station to older ones, and pressing the left button
moves in the reverse order.
FM Mode
If you are listening to an FM radio station in stereo and the sound
cuts out or there is a great deal of noise, then press this button. The
“MONO” display will appear and the output will change to mono.
Though you will not hear the audio in stereo, this may stop the
sound from cutting out and reduce excess noise.
Memory
This button only operates when FM or AM is selected as the input
source. This button allows you to preset frequencies for stations
when using the FM/AM tuner. You can preset up to 40 stations (or
frequencies) to be used with the PRESET buttons.
Front panel facilities
Menu, , , Enter, , , Exit
These buttons are used with the On Screen Display (OSD) menu.
They also perform the same functions as the OSD MENU,
(upper edge of ENTER button), (lower edge of ENTER
button), (left edge of ENTER button), (right edge of ENTER
button), ENTER, and EXIT RETURN buttons on the remote
controller.
Menu: Press to bring up the OSD menu.
Exit: Press to exit the OSD menu when at the Menu Screen, or
move to one screen previous to the one that is displayed if at
any other screen.
and : When selecting items in the OSD Menu, press these
buttons to move the on-screen cursor (or the highlighted
portion) upward and downward.
and : When setting parameters in the OSD menu, press these
buttons to select parameter values or modes.
Enter: Press to display the screen for the selected item in the OSD
Menu.
PHONES
This is a standard stereo jack for connecting stereo headphones.
The audio for the front right and left speakers are sent to the
headphone speakers. When the headphones are plugged in, the
listening mode automatically changes to stereo and output to the
speakers is stopped.
Front panel display
Listening mode or digital input format
indicators
Multi function display
Sleep indicator
Input source format indicator
Video display