Filter
Top Products
25
Before Using
Connections
Other Information
Operations
Recording (continued)
6 Press the REC button.
The MD recorder is now in recording
standby mode.
.
7 Using the AMCS knob, adjust the
recording level.
Adjust the recording level.
7-1 Press the EDIT/NO button, then turn
the AMCS knob until “Rec Level?”
appears.
Then, press the AMCS knob.
When the recording level adjustment
is completed, stop playing the source.
7-2 Turn the AMCS knob to adjust the
recording level.
Adjust the recording level such that the -4
to -2 dB indicator lights when the input
signal is largest. (Also refer to the current
recording level readout displayed in dB.)
Tip:
You can adjust the recording level in 5dB
steps for the range between –60.0 dB and
–30.0 dB, in 2.5 dB steps for the range
between –30.0 dB and –12.5 dB, and in
0.5dB steps for the range between –12.5dB
and +18.0 dB.
Then, press the AMCS knob.
REC
EDIT/NO
ANALOG IN
PUSH TO
ENTER
()
AMCS
R
L
PUSH TO
ENTER
()
AMCS
PUSH TO
ENTER
()
AMCS
010 2 OVER2040
R
4
L
PUSH TO
ENTER
()
AMCS
MINIDISC
RECORDER
STANDBY
CD
INPUT
DUBBING
PUSH TO
ENTER
()
AMCS
DISPLAY EDIT
/
NO YES
REC
STANDBY
/
ON
MD
-
10 5
TX
REC MODE
EDIT/NO
REC MODE
REC
AMCS
Adjust the level so the
OVER indicator will
not light up.
Adjust the level in the range between –4
and –2 for the maximum signal level.
(Continued on the next page)