Onkyo MD-105TX CD Player User Manual


 
11
Before Using
Connections
Other Information
Operations
Connecting to the other components (continued)
1 Connecting to the Amplifier
Connect the MD-105TX to the MD (or TAPE)
jacks of your amplifier.
2 Connecting to the Digital Input
Terminals (DIGITAL INPUT 1, 2)
You can perform digital recording on the MD-
105TX if a CD (Compact Disc) player or DAT
(Digital Audio Tape) deck equipped with a digital
(OPTICAL) output terminal is available. For digital
recording, you need to connect the equipment
to either DIGITAL INPUT 1 or 2 terminal using
the supplied optical cable.
These terminals can also
be used for connecting an
amplifier that is equipped
with a digital output
terminal.
Note
If you use DIGITAL INPUT 2 to connect an
amplifier, you will be unable to utilize the full
capabilities of the MD-105TX.
If you attempt to perform digital recording using
a digital input terminal that is not connected,
“D.In Unlock” will appear.
Terminal protection caps are attached to the
DIGITAL INPUT terminals. Remove the cap for the
terminal you wish to use when connecting the
MD-105TX to digital equipment. Replace the
caps if you are not using the DIGITAL INPUT
terminals.
3 Connection to AC outlet
(UNSWITCHED)
The power cord of another unit can be connected
to this outlet.
Note
The shape, number, and total capacity of the AC
outlets may differ depending on the area in which
the unit is purchased.
230-240 V, 50 Hz model: Capacity is 100 W in total.
120 V, 60 Hz model: Capacity is 120 W in total.
Connections
Amplifier
CD player,
DAT deck, etc.
To wall outlet
Optical fiber
cable
Audio
connection
cable
cable
This unit uses heat-sensitive parts. Do not place this unit on the Amplifier or Receiver.
L
R
US and foreign patents licensed
from Dolby Laboratories.
(
REC
)(
PLAY
)
INPUT OUTPUT
REMOTE
CONTROL
OPTICAL
12
DIGITAL INPUT
L
R
ANALOG
AC OUTLET
AC 230-240
V 50
Hz
UNSWITCHED
100W MAX
.
LR
OUT OUTIN
LR
2
3
1
L
R
US and foreign patents licensed
from Dolby Laboratories.
(
REC
)(
PLAY
)
INPUT OUTPUT
REMOTE
CONTROL
OPTICAL
12
DIGITAL INPUT
L
R
ANALOG
AC OUTLET
AC 230-240
V 50
Hz
UNSWITCHED
100W MAX
.
230-240V, 50Hz models
Capacity is
100 watts.
120V, 60Hz models
Capacity is
120 watts.