44
Setup—Continued
“Search…” → “(name)” → “RIHD On”
If the HTX-22HDX cannot receive the
name of a component, it will be displayed
as “Player*” or “Recorder*”, etc (“*” will
be a number when there’s two or more
components).
• Select Off if a connected component is
incompatible or you’re not sure about its
compatibility.
• If operation is unreliable when set to On,
select Off instead.
• When the Audio TV Out setting is set to
On, or TV Control is set to On, and you’re
listening through your TV’s speakers (see
page 19), if you turn up the volume on the
HTX-22HDX, the sound will be output by
the HTX-22HDX’s speakers. To stop the
HTX-22HDX’s speakers producing sound,
change the settings, change your TV’s set-
tings, or turn down the HTX-22HDX’s vol-
ume.
• See “Using an -compatible TV,
Player, or Recorder” on page 53.
■ ARC (Audio Return Channel)
With the Audio Return Channel (ARC), the
audio output from an HDMI (version 1.4) TV
can be sent to the HTX-22HDX via its HDMI
OUT. To use ARC, your TV must support
ARC, and you must select the ARC (TV)
input on the HTX-22HDX.
Off:
ARC off. Select this if your TV doesn’t
support ARC.
Auto:
Your TV’s audio output can be sent digi-
tally to HTX-22HDX via its HDMI OUT
(default).
The ARC (TV) input source is available only
if your TV supports ARC and Auto is
selected.
When using ARC, to listen to the audio from
your TV through the HTX-22HDX, use the
input selector to select ARC (TV). If your TV
is set to an input other than HDMI, ARC
(TV) will be selected automatically.
Notes:
• This setting can be changed only when the
HDMI Control setting is set to On.
• Auto is selected automatically when the
HDMI Control setting is set to On.
■ Pow Control (Power Control)
To link the power functions of -
compatible components connected via
HDMI, select Enable.
Off:
Power Control disabled.
On:
Power Control enabled (default).
Notes:
• The Power Control setting can be set only
when the HDMI control setting is set to
On.
• HDMI power control only works with
-compatible components that
support it and may not work properly with
some components due to their settings or
compatibility.
• When set to On, the HTX-22HDX con-
sumes more power when on Standby.
• When set to On, and the HTX-22HDX is
on Standby, the HDMI Thru indicator
lights up orange when audio and video
received by an HDMI input is being output
as it is by the HDMI OUT.
• Standby power consumption will increase
during HDMI pass through. However,
power consumption is reduced in the fol-
lowing cases:
1. When your TV is on Standby.
2. When you’re watching TV.
■ TV Ctrl (TV Control)
Select On to control the HTX-22HDX from
an -compatible TV connected via
HDMI.
Off:
TV Control disabled.
On:
TV Control enabled (default).