24
Connecting AV Components—Continued
Notes:
• If you connect both an Onkyo ND-S1 Digital Media Transport and RI Dock to the
HTX-22HDX, since only one input at a time can be set to the “DOCK” input display, connect
the ND-S1 to an OPTICAL DIGITAL input, and set that input to the “DOCK” input display,
and connect the RI Dock to a LINE input, and set that input to the “TAPE,” “MD,” or another
input display. The RI Dock will function properly even though the input display does not
match the type of device.
• Use only cables for connections. cables are supplied with Onkyo players (DVD,
CD, etc.).
• Some components have two jacks. You can connect either one to the HTX-22HDX. The
other jack is for connecting additional -capable components.
• Connect only Onkyo components to jacks. Connecting other manufacturer’s components
may cause a malfunction.
• Some components may not support all functions. Refer to the manuals supplied with your
other Onkyo components.
■ ND-S1/Onkyo Dock Linked Functions
See page 26 for linked system control functions.
■ iPod Alarm Function
If you use the Alarm function on your iPod to start playback, the HTX-22HDX will turn on at
the specified time and select the input to which the ND-S1 or Onkyo Dock is connected automat-
ically.
Notes:
• Linked functions do not work with video playback, or when the alarm on your iPod is set to
play a sound.
• While your iPod is inserted in an ND-S1 or Onkyo Dock, its volume control is disabled.
■ Operating Notes
• Use the volume controls on the HTX-22HDX to adjust the volume.
• If you use your iPod with any other accessories connected, playback detection may not work.
• If you adjust the volume control on your iPod while it’s inserted in an ND-S1 or Onkyo Dock,
make sure it’s set to a suitable level before plugging in your earphones.
• If you use a 5th Generation iPod or iPod nano in an ND-S1, during playback the click wheel
will not work, so to control functions other than play and pause, use the HTX-22HDX’s
remote controller.