Filter
Top Products
Turning On & Basic Operations
En-33
The Home menu provides quick access to frequently used
menus.
■ Network Service
`With this selection, you can use various Internet radio
services or play the contents stored in media connected
to your home network (DLNA) (➔ page 22). Note
that this selection will be grayed out for a short while
after the AV receiver is turned on. Please wait until it
becomes operable.
Press ENTER to display the “NET” screen. If you
want to use the Internet radio services, use / to
select the desired service. Pressing ENTER again
switches to that selection. If you want to play music
files on a server, use / to select “DLNA” and then
press ENTER.
■ USB
`With this selection, you can play contents of portable
players (iPod, etc.) and USB storage devices connected
to the AV receiver’s USB port (➔ pages 21, 22).
Note that this selection will be grayed out for a short
while after the AV receiver is turned on. Please wait
until it becomes operable.
Press ENTER to select a drive or browse the contents
of the media connected, followed by / to select the
desired folder or track. Pressing ENTER as a track is
selected will start playback.
■ InstaPrevue
`With this selection, you can preview audio/video
streams coming from HDMI inputs (HDMI
IN 1/2/3/4/5). Even with multiple components
connected through HDMI, you can easily switch
between inputs as their previews are displayed on a
single screen.
Press ENTER to display the main preview (currently
selected HDMI input) and the additional previews
(other HDMI inputs). Use / or / to select a
preview thumbnail, and pressing ENTER will switch
the AV receiver to that input source.
■ Setup
`With this selection, you can access the common
settings of the on-screen Setup menu.
Press ENTER to display the Setup menu
(➔ page 39).
■ F/W Update
`With this selection, you can update the firmware of the
AV receiver. Note that this selection will be grayed out
for a short while after the AV receiver is turned on.
Please wait until it becomes operable.
Press ENTER to start the procedure (➔ page 62).
Using the Home Menu
The Home menu appears only on a TV that is
connected to the HDMI OUT. If your TV is connected
to other video outputs, use the AV receiver’s display
when changing settings.
1
Press RECEIVER followed by HOME.
The Home menu will be superimposed on the TV
screen.
2
Use / and ENTER to make the desired selection.
Press HOME to close the menu.
Network Service
USB
InstaPrevue
Setup
F/W Update
Home
You need to connect the AV receiver to your home
network (➔ page 70).
Tip
• If no video signals are present, the thumbnails will be filled in
black.
• You can specify the number of preview thumbnails as well as
their positioning on screen (➔ page 48).
Note
• This function cannot be selected when:
– HDMI IN 6 is the current HDMI input source, or
– No signal is present on the current input source.
• Depending on video signals, the picture may not be properly
rendered on the preview thumbnails of InstaPrevue.
Tip
• You can also access frequently used settings from Quick
Setup (➔ page 37).