Onkyo HT-R960 Stereo Receiver User Manual


 
15
Remote Controller
—Continued
For further information, see the pages in parentheses.
A
Standby/On indicator
Red: Subwoofer in standby mode
Blue: Subwoofer on
With the Auto Standby function, the SKW-960
automatically turns on when an input signal is
detected in Standby mode. When there’s no input
signal for a while, the SKW-960 automatically
enters Standby mode.
B
OUTPUT LEVEL control (50)
Adjusts the volume of the subwoofer.
C
LINE INPUT (21)
Connects to the AV receiver’s SUBWOOFER PRE
OUT jack with the supplied RCA cable.
Note:
The Auto Standby function turns the subwoofer on
when the input signal exceeds a certain level. If the
Auto Standby function does not work reliably, try
increasing or decreasing the subwoofer output level
slightly on the AV receiver (see page 79).
The front grilles are not designed to be removed so do
not attempt to remove them forcibly, as this will dam-
age them.
Subwoofer (SKW-960)
1
23
Rear
To wall outlet
Front