Filter
Top Products
10
Connecting the DX-7555
• Read the manuals supplied with your other audio
equipment.
• Don’t connect the power cord until you’ve completed
all audio connections.
ANALOG AUDIO OUTPUT
If your hi-fi amp or AV receiver doesn’t have a digital
input, use the supplied RCA/phono audio connecting
cable to connect the DX-7555’s ANALOG AUDIO
OUTPUTs to your amp’s analog CD inputs.
Notes:
• RCA/phono audio cables are usually color coded: red
and white. Use red plugs to connect right-channel
inputs and outputs, and use white plugs to connect
left-channel inputs and outputs.
• Push each plug in all the way to
make a good connection (loose
connections can cause noise or
malfunctions).
• To prevent interference, keep audio cables away from
power cords and speaker cables.
DIGITAL AUDIO OUTPUT
If your CD-R, MiniDisc, or DAT recorder has a digital
input, use a commercially available coaxial or optical
fiber digital audio cable to connect the DX-7555’s
COAXIAL or OPTICAL DIGITAL AUDIO OUTPUT
to your recorder.
You can also use the digital outputs to connect to an amp
that has a digital input.
Note:
The OPTICAL DIGITAL AUDIO
OUTPUT has a dust cap for keeping
out dust and dirt when it’s not in
use. Remove the cap before con-
necting an optical fiber cable. Push
the plug in all the way to make a
good connection. Keep the dust cap
in a safe place for future use.
Audio Connections
Right!
Wrong!
RCA/phono
audio cable
CD-R, MiniDisc, DAT recorder
Hi-fi amp, AV receiver
Optical INCD
RL
Connect
one or the
other
Coaxial IN
Coaxial cable
(not supplied)
Connect one or the
other
Optical IN Coaxial IN
Coaxial cable
(not supplied)
Disconnect the power
cord before making any
connections!
Optical fiber cable
(not supplied)
Optical fiber cable
(not supplied)