Filter
Top Products
29
Setup—Continued
Making Settings
Caution
If this setting is changed during playback, it may not be
possible to store the changed settings in memory. If you have
changed the settings during playback, stop playback and
other actions, and then turn off the power.
Press the SETUP button on the remote
controller.
The last item to be configured the last time you
performed setup appears.
Press the FOLDER / buttons, and select the
item you wish to configure.
Press the TRACK / buttons, and select the
setting value.
When you are finished making settings, press
the ENTER button.
"FINISH" appears in the display.
Your settings are enabled, and you are returned to
normal mode.
Notes
- The settings will not be enabled unless you press the ENTER
button.
- Press the SETUP button to cancel your settings.