Filter
Top Products
Playback Methods
23
In addition to listening to tracks in the order they were recorded on the disc, there are four other playback methods:
Repeat, A-B Repeat, Random, and Memory.
You can also mix multiple playback methods (for example, repeat + random or repeat + memory).
Repeat (Loop)
Repeatedly play the currently playing track, all tracks
in the folder in which the current track is located, or all
tracks on the disc.
Press the REPEAT button on the remote controller
repeatedly to toggle through the repeat (loop) types.
You can check the selected repeat method on the unit's
display.
A-B Repeat (Loop between Two
Points)
Use this mode to repeatedly play a range of tracks, by
specifying a starting point (point A) and stopping point
(point B).
The disc plays. (See p.17)
Press the remote controller's A-B button at the
location where you wish to start loop playback.
appears on the unit's display.
Press the remote controller's A-B button at the
location where you wish to end loop playback.
appears on the unit's display.
Press the button or A-B button to cancel loop
playback.
Random (Shuffle)
Press the RANDOM button on the remote control to
play back tracks in shuffle mode.
If a disc containing MP3 or WMA files is being played,
and folders are being used, then you can select whether
to perform random playback on the entire disc or on a
folder.
Press the RANDOM button again to return to normal
playback.
Playback Status Display Status
Ordinary play-
back
Loop single
track
Loop all tracks
in folder
Loop entire
disc
Playback Status Display Status
Ordinary play-
back
Random play-
back of entire
disc
Random play-
back of tracks
in a folder
(only for discs
containing
MP3 or WMA
tracks)